Why You Should Have Two Plungers

Blog

Tag: plunger

Why You Should Have Two Plungers

Posted on December 6, 2021 by Melbourne Plumber

The modern plunger is a simple device which was invented sometime in the 1700's. It is unknown who invented the plunger but the device has worked the same since day one. It consists of using a pliable suction cup attached to a stick or pole. The cup creates a vacuum around the pipe and the pulling and pushing action helps knock loose whatever is causing the clog. Moreover, when the suction end is removed from the drain or clogged pipe, the restoration of pressure to it usually forces free what has been lodged. The science is simple and logic is ...

Read More

How to Unclog a Bathtub

Posted on June 29, 2020 by Melbourne Plumber

Sometimes unclogging a bathtub can be as simple as using a toilet plunger on the drain in order to get the water flowing again. The best way to do this is as follows: Wear some rubber boot if you have them in order to prevent slippage. It wouldn't hurt to wear eye-goggles either to prevent dirty water from getting into your eyes. Remove any standing water using a bucket or cup. Remove the strainer or stopper that may be in the drain. This can usually be done using a screwdriver. Add a few inches of water to the tub. You ...

Read More

Recent Posts

Categories

Archives